新闻动态

NEWS

Check category

What if the belt conveyor goes wrong?

(Summary description)Belt conveyor belt deviation is a common problem in use, so how to deal with this problem correctly? The following small series will take you to take a look at the way to deal with belt deviation. First, the belt deviation is the most common fault when the belt conveyor is running. Pay attention to the dimensional accuracy of the installation and daily maintenance. Then there are many reasons for deviation, and it needs to be treated differently according to different reasons.

What if the belt conveyor goes wrong?

(Summary description)Belt conveyor belt deviation is a common problem in use, so how to deal with this problem correctly? The following small series will take you to take a look at the way to deal with belt deviation. First, the belt deviation is the most common fault when the belt conveyor is running. Pay attention to the dimensional accuracy of the installation and daily maintenance. Then there are many reasons for deviation, and it needs to be treated differently according to different reasons.

  • Categories:Technology Center
  • Author:
  • Origin:
  • Time of issue:2019-05-12 22:02
  • Views:2
Information

Belt conveyor belt deviation is a common problem in use, so how to deal with this problem correctly? The following small series will take you to take a look at the way to deal with belt deviation. First, the belt deviation is the most common fault when the belt conveyor is running. Pay attention to the dimensional accuracy of the installation and daily maintenance. Then there are many reasons for deviation, and it needs to be treated differently according to different reasons.and it needs to be treated differently according to different reasons.and it needs to be treated differently according to different reasons.and it needs to be treated differently according to different reasons.and it needs to be treated differently according to different reasons.

 

1. Adjust the belt conveyor carrying roller set

The position of the roller set can be adjusted to adjust the deviation when the middle of the belt conveyor is deflected; the mounting holes on both sides of the roller set are processed to grow holes for adjustment. Which side of the belt is biased, which side of the roller set moves forward toward the belt advancement direction, or the other side moves backward. When the belt is deflected in the upward direction, the lower position of the roller set should move to the left, and the upper position of the idler set moves to the right.

 

2. install the belt conveyor centering roller set

There are many types of self-aligning roller sets, such as intermediate shaft type, four-bar type type, vertical roller type, etc., which are blocked or idle rollers in the horizontal direction to block or generate lateral thrust to make the belt automatically reach the center of the belt. the goal of. This method is generally reasonable when the total length of the belt conveyor is short or when the belt conveyor is operated in both directions, because the shorter belt conveyor is more prone to deviation and is not easy to adjust.

 

3. Adjust the position of the belt conveyor drive roller and the reversing roller

The adjustment of the driving roller and the redirecting roller is an important part of the belt deviation adjustment. Since a belt conveyor has at least 2 to 5 rollers, all drums must be installed at a position perpendicular to the centerline of the belt conveyor. If the deflection is too large, deviation will occur. The adjustment method is similar to the adjustment of the roller set. For the head roller, such as the belt, to the right side of the drum, the bearing housing on the right side should move forward, and the belt should be moved to the left side of the drum. The bearing housing on the left side should move forward, and the corresponding bearing can also Move the left bearing housing back or the right bearing housing back.

 

4. Adjustment of belt conveyor tensioning

The adjustment of the belt tension is a very important part of the belt conveyor's deviation adjustment. The two reversing rollers on the upper part of the heavy hammer tensioning should be perpendicular to the vertical line of gravity in addition to the longitudinal direction of the belt, that is, the horizontal center line of the shaft is ensured.

I hope the above information can help everyone.

Scan the QR code to read on your phone